Stone and Concrete
Densifiers are a complex mix of inorganic solubles and silicates that are applied to concrete to reduce porosity and absorption of
water, increase hardness, and increase the “polished life” of the floor. Unlike normal sealers that are worn away over time and traffic,
Densifiers will not peel off or wear away.
Densifiers are easy to apply with a broom, mop or sprayer. Use full strength.
Apply enough to leave puddles, then squeegee excess away. Dry 10-12 hours and do not rinse or wet for 48 hours. Coverage 600-1000
ft. per gallon. Concrete treated with densifiers can be polished with diamonds to get that “wet look” finish.
CONCRETE DENSIFIER #CP100 1
Concrete Densifier - Permanently strengthens old and new concrete floors eliminating the use of sealers. Dust proofs the floor
while delivering high abrasion resistance.
DENSIFIER LITHIUM #CP701 5 gal.
is a blend lithium plus other silicates creating a permanent seal on concrete and terrazzo. Creates a long lasting protected surface.