Concrete Active Buffing Agent - The final step to quickly bring out the very high gloss on finished concrete. High quality
abrasives and special buffering agents reduce etching and removes finest scratches. Low odor and fumes. Mix with water and apply with
scrubbing pad and water in 25 sq. ft sections. Buff with floor machine until you get the desired finish then squeegee excess.
lbs. Powder , #CP200-25, 25 lbs. Powder
Marble Active - Marble Active is formulated to quickly create very high gloss on
finished marble (except green) and stone. Marble Active fills open pores, forming a guard to oil, grease, water and common dirt.
Marble Active is not a surface coating that needs to be reapplied constantly to maintain the finish. Apply with buffing pad
and water creates that high gloss “wet” look.
# MC200- 5, 5 lbs. Powder, #MCS200-25, 25 lbs. Powder
Stone Brite Sealer
Seals while letting the stone vapors release. Increases resistance to slip and fall, and soil resistance. Apply
with #3 steel wool for hard surfaces and finer grit for softer stone.
# MP100 - 1 gal. Sealer Liquid
ProTec Sealer - Impregnating
clear sealer applied directly to stone and concrete floors creates an invisible barrier that resists stain while leaving a high gloss
finish. Use as an alternative to “natural” polished floors.
#MPT1000 - 1 gal. Liquid
WIZZARD - Cleaner removes
and emulsifies dirt, debris, soils and oils both on and in the floor for easier scrubbing. WIZZARD improves the look of the floor
by makingit smoother leaving the floor debris free and protected against soil or grease. Metal silicates repair scratches and scuffs
from daily wear allowing longer lasting high gloss shine decreasing your maintenance costs.
#MP101 - 5 gal. Liquid
Action Stone Polishing Lubricator - Triple Action cleans, and lubricates for polishing, making the job easier for you with less
amp draw on your equipment. Recommended for use with autoscrubbers.
#CC100 - 5 gal. Liquid
Stone and Concrete
Cleaners and Polish